To troubleshoot your central heating unit, start with the basic things and work your way up. To keep costs down, identify the problems you may have and solve the small ones yourself. A little care can sometimes prevent massive issues from arising and save you from having to call a professional for heating services in Yuma.
Let us start by looking at some of the recommendations you can use to save money on repair or heating replacement in Yuma, AZ.
Check the thermostat.
When it comes to diagnosing problems with central heating that is not working, the first step is simple, to check the thermostat setting. Turn it on and set the temperature to the level that will control the heat. If it still does not turn on, look at your circuit breaker to see if the breaker for your central heating system has been tripped. If it is, turn it off and switch it on after some time.
Check the filters.
Spot the cold air returns in your home and remove the screens to check your filters. It is advisable to clean the filters at least twice a year, and if they’re not, dust and debris can accumulate and clog them. If your filters are dirty, look for a heating replacement in Yuma, AZ, and replace them to see what difference it makes.
Check the pilot light.
Gas or propane-powered home heating systems have a pilot light at the bottom of the display, usually near the floor. If this light passes out, your system will not function. Once you cross-check everything else, turn off the power and reset the valve located within the unit. Wait for 5 minutes before turning the pilot light on. If this does not work, make sure you are not out of gas. If you have gas and your central heating is still not working, you may need to replace your igniter.
Clear the exhaust flue from the chimney.
The problem may be debris in the chimney exhaust flue. Switch off the furnace and set the thermostat to the lowest temperature to check this. Test the duct for dirt before removing it. Then, reassemble the parts in the same order and direction you separated them.
Remove any leaves or debris from the exhaust pipes.
If the air from your furnace enters or exits the house, leaves or debris may be gumming the intake or exhaust. Replace the screen mesh on the pipes with a half-inch mesh hardware cloth.
Clean the drain lines.
Your heating system can use up to a gallon of water per day during the heating cycle. The heating system will stop working if the drain lines are filled with sediment or mold growth.
In most cases, you can satisfactorily resolve the problem yourself and save thousands of dollars by following all of these steps. If your central heating is still not working, it might be time to call a furnace professional at Comstock Air.